VTK-TSN3062GF
- 6 x Gigabit Ports + 2x 1.25/2.5G SFP ports
- Fully Layer 3 Managed switch function, unicast and multicast routing
- IPv4 dynamic routing protocol supports RIPv2 and OSPFv2, IPv6 dynamic routing protocol supports OSPFv3
- IEEE 1588v2 PTP Precision Time Protocol and SyncE
- Features IEEE 802.1AS Time Synchronization, IEEE802.1Qbu Frame Preemption, IEEE 802.1Qbv Time Aware Shaper and IEEE 802.1CB Seamless Redundancy
- Supports RSTP/MSTP/ERPSv2/APS/MRP
- RADIUS/TACACS+ users access authentication
- IP40 Aluminium case, Fanless design
- 9-56V DC redundant power with reverse polarity protection
- DIN-rail and wall mount installation
- -40 to +75℃ operating temperature
Introducing the VistoTek VTK-TSN3062GF, a groundbreaking TSN Industrial Ethernet Switch that is set to revolutionize the world of industrial automation. With its cutting-edge features and advanced capabilities, this switch is truly a game-changer. Boasting an impressive 6×10/100/1000BASE-T RJ45 ports, it provides lightning-fast connectivity for all your network needs. But that’s not all – there are also four additional 1G/2.5G BASE-X SFP ports which further enhance its versatility and adaptability. Encased in a rugged IP40 metal case, this beast of a switch guarantees stable operation even in the harshest environments imaginable. It effortlessly addresses every level of the industrial automation network – from the field bus to the factory backbone – ensuring seamless communication throughout your entire system.
| Ethernet Port | 6 x10/100/1000Base-T RJ45 auto-MDI/MDI-X |
| SFP/SFP+ Port | 2 X1.25/2.5G SFP/SFP+ slots Compatible with 100BASE-FX,1000BASE-SX/LX/BX,2500BASE-X- SR/LR SFP optical transceiver |
| Console Port | 1xRJ45-to-RS232 serial port(115200,8,N,1) |
| Switch Mode | Store and Forward |
| Backplane Capacity | 128 Gbps/non-blocking |
| Jumbo Frames | 10K Bytes |
| Address Table | 32K |
| Flow Control | IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
| IP Interfaces | Max. 128 VLAN interface |
| Routing Table | Max. 512 static route entries
Max. 3072 routing table entries |
| Routing Protocol | IPv4 RIPv2
IPv4 OSPFv2 IPv6 OSPFv3 IPv4 Hardware Static Routing IPv6 Hardware Static Routing |
| Port Configuration | Port Disable/Enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Port link capability control |
| Port Status | Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status |
| Port Mirroring | TX/RX/Both Many-to-1 monitor Mirror – Remote Switched Port Analyzer(Cisco RSPAN) Supports up to 5 sessions |
| VLAN | IEEE 802.1Q tagged VLAN IEEE 802.1ad Q-in-Q tunneling Private VLAN MAC-based VLAN VLAN Translation VCL Protocol-based VLAN Voice VLAN MVR(Multicast VLAN registration), MVRP(Multiple VLAN Registration Protocol GVRP Up to 4K VLAN groups, out of 4095 VLAN IDs |
| Installation | DIN-rail or wall mounting |
| Dimensions | 140mm x 108mm x 54mm (L x W x H) |
| Weight | 0.9kg |
| Power Consumption | Max. 6.5 watts(System on) MAX. 12 watts(Full loading) |
| Electrostatic Discharge | Contact discharge :± 8kV Discharge in air: ± 15kV |
| Surge Protection | Power Supply: ± 4kV RJ45 Port: ± 2kV |
| LED Indicators | P1(Green), P2(Green), ALM(Red). RUN(Green) SFP: 1/2.5G RJ45: 10/100M(Green), 1000M(Green) |