VTK-SP601
Video Surge Protector Device
- Operating voltage Un:12VDC
- Nominal discharge current(In): 3KA
- Max. Inpulse current In:5KA
- Response time ta:1ns
- Operating temperature:-40~85°C
The VTK-SP601 product is primarily used in analog video signal systems to protect electrical and electronic equipment signal lines from lightning electromagnetic pulses, induced overvoltages, and switching overvoltages. It is widely applied in communication line protection across fields such as security monitoring, transportation, and communications. This series of products boasts features such as high transmission rates, exceptionally fast response times, low insertion loss, and low residual voltage, delivering excellent lightning protection performance without compromising normal equipment communication.
| Operating Voltage (Un) | 12V |
| Nominal Discharge Current (In) | 3kA |
| Maximum Impulse Current (Imax) | 5kA |
| Protection Voltage Level (Up) | 20V |
| Transmission Rate | 100Mbps |
| Response Time | 1ns |
| Characteristic Impedance | 75Ω |
| Insertion Loss | 0.5dB |
| Rated Load Current (IL) | 0.5A |
| SPD Category | Combined Type |
| Failure Indicator | Line-to-Ground Short Circuit or Disconnection |
| Connection Type | BNC Female Input / Male Output or BDC Double Female |
| Number of Protected Lines | 1 |
| Dimensions | 83*25*25mm |
| Protection Level | IP20 |
| Housing Material | Aluminum Alloy / Stainless Steel |
| Operating Temperature | Temperature -40 to +85°C |
